Netgenium AUG3201-IP User Manual

geniumNet
AUG3201-IP Cong Guide
© Copyright Netgenium Systems 2017 Page 30
Default
Navigate to: Maintenance>Default
To return the unit to factory default settings click the Default button and
reboot the speaker.
To reboot the unit click the Reboot button or power cycle the device.
Update Firmware
The remote update feature is available on software version 5.7.1 onwards.
The update process is completed using the web browser interface.
Google Chrome is recommended.
Before you start you will need the new image (with a .ngx le extension) on
the hard disk of your computer.
Browse to the IP address of the device you want to upgrade.
Navigate to: Maintenance>Update Firmware

Netgenium AUG3201-IP Specifications

General

Brand	Netgenium
Model	AUG3201-IP
Category	Switch
Language	English