Netis WF-2402 - Page 20

To Next Page

To Previous Page

150Mbps Wireless-N Broadband Router User Manual

Figure 3-15

6. Choose Obtain an IP address automatically and Obtain DNS server address automatically,

and then press OK to close the Internet Protocol (TCP/IP) Properties window

Main Page

Default Chapter2
- Fcc Radiation Exposure Statement2
- Fcc Statement2
Contents4
- Table of Contents4
Introduction7
- Product Overview7
- Main Features7
- Supporting Standard and Protocol8
- Working Environment8
Humidity8
Power8
Hardware Installation9
- System Requirement9
- Panel9
Front Panel9
- Restore to Factory Configuration10
- Hardware Installation Procedures10
Login12
- Configure Computer12
- Checking Connection with the Router25
- Login26
Router Setup28
- Status28
- Quick Setup30
- Wps Settings33
  - Add a New Device33
  - WPS Configuration34
- Network35
- Wireless38
- Dhcp48
- Forwarding49
- Security51
  - Security Settings51
  - IP Address Filtering52
Follow the Following Steps to Set Mac Filter53
Follow the Following Steps to Set Internet Access Control53
- MAC Filtering53
1 You Can Select “Enable” and Click “Save” to Enable “Dns Filter”54
- Domain Filtering54
For Dns Key Words Listed, Others Are Permitted”, Select the Item You54
Appropriate Rules for “Dns Filter”54
Want, and Click “Save” Button54
Follow These Steps to Set Dns Filter54
- For Dns Key Words Listed, Others Are Permitted", Select the Item You Want, and Click "Save" Button54
You Can Select "Enable" and Click "Save" to Enable "Dns Filter" Function. this Is Only the First Step, You Should Continued to Create Appropriate Rules for "Dns Filter54
Input Dns Filter Key Words54
- Item on the List, Click "Delete" to Delete It54
- There Are Two Items Supplied, "Permit through the Router for Dns54
- Want, and Click "Save" Button54
If You Want to Delete Certain Item on the List, Select Appropriate54
Item on the List, Click “Delete” to Delete It55
- Static Routing55
- Qos Settings56
- Dynamic Dns56
- System Tools57
- About59
Troubleshooting60
I Cannot Access the Web-Based Configuration Utility from the Ethernet Computer Used to Configure the Router60
I Forget Password (Reset the Router Without Login)60
I Have some Problems Related to Connection with Cable Modem60
I Can Browse the Router's Web-Based Configuration Utility but Cannot Access the Internet60
My Wireless Client Cannot Communicate with Another Ethernet Computer61

Netis WF-2402 - Page 20

Table of Contents

Other manuals for Netis WF-2402

Related product manuals