Netis WF-2402 - Wireless MAC Filtering

150Mbps Wireless-N Broadband Router User Manual
41
Figure 4-29
4.5.3. Wireless MAC Filtering
Figure 4-30
 MAC Filter Status: the default is disable. You can filter wired users by enabling this
function; thus unauthorized users can not access the network.
 Description: describe MAC Filter list to tell from different MAC Filter lists.
 Rule: you can select permit or deny. The default is permit.
 MAC address: input the MAC address that you want to control. The default format is
**-**-**-**-**-**（e.g.: 00-22-33-da-cc-bb）.
4.5.4. WDS
4.5.4.1. WDS Settings
If you have selected WDS or AP+WDS mode in Wireless Basic-Radio Mode, please do the
following configurations.