Netis WF-2402 User Manual

150Mbps Wireless-N Broadband Router User Manual
27
4. Router Setup
4.1. Status
This feature provides running status information and detailed information about router.
4.1.1. Version
Show the hardware version and firmware version.
Figure 4-1
4.1.2. WAN
This feature provides running status information of the WAN port (the port connect to the
Internet)
 Figure 4-2
 Connection Type: Display router’s current connection type, It should be one of “PPPoE”,
“DHCP”, “Static IP”, depending on what kind of connection type your ISP provides.
 Physical Address: The physical address of WAN port, this is a unique address assigned by
manufacturer.
 IP Address: The IP address you obtained after connect to the Internet, if you haven’t
connected to the Internet yet, this field is 0.0.0.0.
 Subnet Mask: The Subnet mask you obtained after connect to the Internet, if you haven’t
connected to Internet yet, this field is 0.0.0.0.

Netis WF-2402 Specifications

General

Brand	Netis
Model	WF-2402
Category	Wireless Router
Language	English