to delete it.
4.9. Static Routing
Most of broadband router and wireless router are using NAT mode, so this feature is designed
for most common network environment.
Figure 4-51
Destination Network or IP Address: Specify a certain destination Network or IP address
which static route forward to.
Subnet Mask: Subnet mask is used for distinguish Network portion and Host portion for an
IP address.
Next-hop IP Address: This is an IP address of the next-hop device (and also is the gateway
address for local host) that allows forwarding data between router and remote network or
host.
Routing Table: You can check out all current route items, click “delete” button to delete a
route item existed in routing table.
To Next Page
Loading...
Need help?
General
