Netis WF-2406 - Wireless Basic Configuration

WF-2406 User Manual
29
Figure 4-4
 Wireless status: Display wireless interface status is enabled or not
 SSID: SSID (Service Set Identifier) is your wireless network's name shared among all
points in a wireless network.
 Wireless Mode: Current wireless mode of wireless router
 Channel: Display current channel of your wireless router.
 MAC Address: The MAC address is used for wireless communication
 WPS Status: Display WPS (Wi-Fi Protected Setup) status is enabled or not.
4.1.5. Secondary AP
This item provides current running information of Secondary AP.
Figure 4-5
4.1.6. Statistics
This item provides statistics information about the bits router sends and received.