Netis WF-2406 - Lan

WF-2406 User Manual
43
4.4.2. LAN
The IP address of LAN port is used for access router itself by computers that connect to the
router directly; here you can set IP address you need. The IP address format is like
***.***.***.***, and default IP address is 192.168.1.1, the default subnet mask is
255.255.255.0.
Figure 4-27
Figure 4-28
 DHCP Server Status: Keep the default setting “Enable”, so router is able to use DHCP
function. If a DHCP server has already existed in the network, please select “Disable”.
 IP Address Pool: The IP Address pool is used for allocate IP address by DHCP server; The
IP Address pool range is also changeable
 DHCP IP Address Reserving: reserve IP address for designed physical address host. If
you want to configure a fixed IP address for some host, please input physical address and
IP address, then click add