Example of Eventlog
Datalog
The Datalog service records the main inverter data in the „data.snv‟ file. The file can be
downloaded via FTP or can be sent by e-mail using the “Email report” service.
The following data are monitored:
Temp: Inverter Temperature
Iac1: Output current line 1
Iac2: Output current line 2
Iac3: Output current line 3
Vac1: Grid voltage 1
Vac2: Grid voltage 2
Vac3: Grid voltage 3
Fac: Grid frequency
Pac: output power
Zac: Grid impedance (only if supported)
Etot: Total energy
Htot: Total working time
Vpv1: Input voltage MPPT1
Vpv2: Input voltage MPPT2 (if embedded)
Vpv3: Input voltage MPPT3 (if embedded)
Ipv1: Input current MPPT1
Ipv2: Input current MPPT2
Ipv3: Input current MPPT3
To Next Page
Loading...
