NetMan 102 plus - Save and Load Menu

- ENGLISH -
- 89 -
Save and load menu
The Save and load menu shows a screen like the one below.
/------------------------/
/ Save and load /
/------------------------/
Apply changes..:<--
Revert changes.:
Load from file.:
Save to file...:
Netboot........:
Reset default..:
With this menu the configuration can be saved to make it effective or to load other configurations
as described in the following table.
Function
Description
Apply changes
Saves the configuration in flash memory and then automatically restarts to
make the changes effective
Revert changes
Cancels the changes and reloads the last saved configuration (excluding the
network -IP Config- and the clock –Time setting- configurations)
Load from file
The configuration is loaded from a file sent via FTP
(1)
Save to file
The configuration is saved on a file to be downloaded via FTP
(1)
Netboot
Restarts and attempts to update to a new version of the firmware if available
on the network
(2)
Reset default
Loads the default configuration
(1)
see paragraph “Configuration of several devices”
(2)
see paragraph “Firmware update”