NetMan 102 plus - Security Menu

- ENGLISH -
- 87 -
Security menu
The Security menu shows a screen like the one below.
/------------------------/
/ Security /
/------------------------/
Config Password:<--
UDP Password...:
Firewall.......:
From this menu the setup password, the UDP password and the firewall can be configured as
described in the following table.
Menu
Function
Config Password
To change the password used to enter the configuration menu and for
FTP connections
(1)
UDP Password
To change the password used for UDP communication
(2)
Firewall
To configure access from the network
(1)
default configuration: “password”.
(2)
this password must be the same as the one used by the software.
Pressing the ENTER key corresponding to the “Config Password” command displays a screen like
the one shown below.
Enter the old password:
Enter the new password:
Confirm the new password:
Enter, as requested, the old and the new password.
Pressing the ENTER key corresponding to the “UDP Password” command displays a screen like
the one shown below.
Enter the new UDP password:
Confirm the new UDP password:
Enter, as requested, the new password.