NOTE: If a static IP address is assigned to the device, all the fields must be configured with the
network parameters. If a dynamic IP address is assigned, just enter „dhcp‟ in the “IP
Address/DHCP” field and provide a hostname; all the other options should be ignored because
these are automatically configured with DHCP.
After pressing “ESC” and “Y” to confirm exit from the menu, a screen is displayed summarizing the
current settings (see image below). Press the “ENTER” key to return to the main menu. The
configuration must however be saved to make it effective in the event of a restart of the device
(see “Save and load” menu).
Hostname : inverter_server.mynetwork.domain
Current IPlus4 addr.: 10.1.10.187/16 (255.255.0.0) (active)
Current IPlus6 addr.: fe80:0:0:0:260:35ff:fe02:4184/64 (active)
Default IPlus4 GW : 10.1.4.1
Ethernet Address : 00:60:35:02:41:84
Primary DNS : 10.1.4.2
Secondary DNS : 10.3.4.1
DNS Timeout : 0 (ms)
DHCP Server : 10.1.5.1
DHCP Enabled : true
DHCP Lease Ends : Sun May 18 15:29:12 GMT 2007
(66 hr, 40 min, 38 seconds left)
Mailhost : mymailserver
Restore From Flash: Not Committed
To Next Page
Loading...
