Scanner Transmitter Setting
Enter setting
Set working channel:
e.g.: NT 111=10#, set working
channel 10. Range: 00-15, end with
#.
Set transmitter ID:
e.g.: NT 121=100#,
set transmitter ID 100. Range:
1-254, end with #.
Set corresponding receiver
ID
Set transmitter reporting to a named
receiver.
e.g.: NT 122=200#,
set corresponding receiver ID 200.
Range: 1-254, end with #.
Activate or deactivate beeper
function to indicate whether or not
the signals are received during
uploading data.
Signals received: 1 beep
Signals not received: 3 consecutive
beeps
Note: this function will affect
scanning speed. Scanning speed is 1
code per second when it is activated
and 3 codes per second when not.
Range: 2#, 3#.
Restore all original
transmitter settings
Restore this module to original
settings.
Save& Exit
To Next Page
Loading...
Need help?
General
