94 Chapter 8 Error Messages
Error Code
Explanation
E-109
<DECIMAL PROGRAM DATA> more than
exponential indicator (E).
E-110
<SUFFIX PROGRAM DATA> must have digit
following sign.
E-111
<SUFFIX PROGRAM DATA> must have
character following operator.
E-113
<ARBITRARY BLOCK PROGRAM DATA> less
than digit count.
E-114
<DEFINITE LENGTH BLOCK PROGRAM
DATA> premature end of data.
E-115
<PLACEHOLDER PROGRAM DATA> identifier
not valid.
E-116
Parser syntax error, character was not expected.
E-120
<program mnemonic> Lookup, word as part of a
header path, has no commands.
E-121
<program mnemonic> Lookup, word as part of a
header path, is not found.
E-122
<program mnemonic> Lookup, cannot find a null
entry.
E-123
<program mnemonic> Lookup, word within context
of current path, is not found.
E-124
<program mnemonic> Lookup, failed because
query/command type match failed.
E-125
<program mnemonic> Lookup, word within context
of common command path, is not found.
E-126
Too few or too many program data elements.
E-201
<PROGRAM DATA> value out of range.
E-202
<PROGRAM DATA> will not convert to valid
type.
E-203
Security violation, command is not available
without clearance.
E-204
<PROGRAM DATA> suffix type is not valid.
E-205
<PROGRAM DATA> is not a Boolean value or
word.
E-206
<PROGRAM DATA> will not convert to a signed
16-byte value.
E-207
<PROGRAM DATA> will not convert to an
unsigned 16-byte value.
E-208
<PROGRAM DATA> will not convert to a signed
32-byte value.
E-209
<PROGRAM DATA> will not convert to an
unsigned 32-byte value.
E-210
<PROGRAM DATA> will not convert to a floating
point value.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
