M94011A
Oriel
®
LCS-100
TM
Small Area Sol1A
- 10 -
The Electrical Shock Symbol in the figure above appears throughout this manual. This symbol
indicates a hazard arising from dangerous voltage. Any mishandling could result in irreparable
damage to the equipment, and personal injury or death.
Caution, Hot Surface
The Caution, Hot Surface Symbol in the figure above appears on the 94011A(-ES) and throughout
this manual. This symbol indicates a burn hazard arising from elevated temperatures.
European Union CE Mark
The presence of the CE Mark on Newport Corporation equipment means that it has been
designed, tested and certified as complying with all applicable European Union (CE) regulations
and recommendations.
Alternating voltage symbol
This international symbol designates an alternating voltage or current.
Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product or on its packaging indicates that this product must not be disposed of
with regular waste. Instead, it is the user responsibility to dispose of waste equipment according to
the local laws. The separate collection and recycling of the waste equipment at the time of
disposal will help to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For information about where the user can drop off the
waste equipment for recycling, please contact your local Newport Corporation representative.
Protective Conductor Terminal
The protective conductor terminal symbol in the above figure identifies the location of the bonding
terminal inside the unit, which is bonded to conductive accessible parts of the enclosure for safety
purposes.
ON
The ON symbol in the above figure indicates the ON position of the power switch, which is located
To Next Page
Loading...