M94011A
Oriel
®
LCS-100
TM
Small Area Sol1A
- 9 -
To avoid fire hazard, use only the specified fuse(s) with the correct type number, voltage and
current ratings as referenced in the appropriate locations in the service instructions or on the
equipment. Only qualified service personnel should replace fuses.
To avoid explosion, do not operate this equipment in an explosive atmosphere.
Qualified service personnel should perform safety checks after any service.
2.8 GENERAL CAUTIONS
Observe these cautions when operating or servicing this equipment:
If this equipment is used in a manner not specified in this manual, the protection provided by this
equipment may be impaired.
Do not block ventilation openings.
Do not position this product in such a manner that would make it difficult to disconnect the power
cord.
Use only the specified replacement parts.
Follow precautions for static sensitive devices when handling this equipment.
This product should only be powered as described in the manual.
Aside from the lamp and filter holder, there are no operator serviceable parts inside - arc lamp
maintenance is to be performed by a responsible body that has read, understands and follows the
precautions in this manual.
To prevent damage to the equipment, read the instructions in the equipment manual for proper
input voltage.
2.9 WARNING SYMBOLS
The following terms and symbols are used in this documentation and also appear on the LCS-100
TM
Small area Sol1A where safety-related issues occur.
General Warning or Caution
The Exclamation Symbol in the figure above appears in Warning and Caution content throughout
this document. This symbol designates a matter in which personal injury or damage to the
equipment is possible.
Electric Shock
To Next Page
Loading...