M94011A
Oriel
®
LCS-100
TM
Small Area Sol1A
- 23 -
Do not position the 94011A such that it is difficult to operate the power switch or remove the power
cord.
Figure 19: 94011A-ES Dimensions
6.3 LAMP START
1. Install the desired filter in the filter holder. See Section 4 for detailed instructions.
2. Install the lamp. See Section 5 for detailed instructions.
3. Connect the 94011A(-ES) to the AC mains.
4. Review the safety precautions of Section 2, especially Section 2.2. Make sure that the output
beam is positioned as desired and all personnel are wearing appropriate safety apparel.
5. Turn on the power switch. The lamp will start within a few seconds. The fan will start in about 6
seconds.
6. The light output will be stable in less than 10 minutes.
W.D.
To Next Page
Loading...