M94011A
Oriel
®
LCS-100
TM
Small Area Sol1A
- 4 -
1 INTRODUCTION
The Oriel
®
LCS-100
TM
Small Area Sol1A Series is an integrated, compact, and easy to operate Solar
Simulator.
The Oriel
®
LCS-100
TM
consists of:
PN 603402: light source assembly containing
o Factory-preset power supply igniter
o Lamp housing with a pre-aligned lamp mount
o Fan assembly with adaptive speed control for stable output
o Safety interlocks and thermal cutout protection
PN 90045340: mounted optics containing
o Beam homogenizer
o 90 degree beam turner, for downward, upward, and side directing
PN 81088A-LCS: AM1.5G Filter (AM0 or AM Direct filter optional accessories)
PN 6252: 100W Ozone Free Xenon lamp with integral elliptical reflector
PN 75: Heavy Duty 14” Damped Rod for Working Distance adjustment, inch and metric mount
PN 370-RC: Post Clamp Assembly
PN 90056950: Oriel
®
1.5” Series flange at input of 90 degree beam turner
PN 90-11-042 & 90-11-049: hex wrenches: 1/16”, 3/16”, respectively
Certificate of Compliance to IEC and ASTM Standards ABB rating
All that is required is mounting the adjustable mounting rod, filter and lamp, plugging in the power cord,
switching on the source and adjusting the Irradiance at the working height.
LCS-100
TM
Series Solar Simulators
94011A
LCS-100
TM
Solar Simulator, Manual Shutter only
94011A-ES
LCS-100
TM
Solar Simulator, Manual and Motorized Safety Shutter
Accessories
6252
Replacement 100 W Xenon lamp assembly
81011-LCS
2” Square AM0 Filter mounted in frame
81389-LCS
2” Square AM Direct Filter mounted in frame
SA2-11 (M-SA2-11)
12” x 12” (300 x 300mm) Solid Aluminum Plate
SA2-12 (M-SA2-12)
24” x 12” (600 x 300mm) Solid Aluminum Plate
20-22-005
LEVELER 1/4-20 X 1 Length Leveling foot for use with Inch Plate, 4 required
91150V
Reference Cell and Meter System
PVIV-1A
1 Amp I-V Measurement SourceMeter, Software and Cables
To Next Page
Loading...