Newport Oriel LCS-100 - Figure 15: Lamp Connector Engagement; Figure 16: Lamp Mounted Properly in Its Cage

M94011A
Oriel
®
LCS-100
TM
Small Area Sol1A
- 20 -
Figure 15: Lamp connector engagement
11. Replace the lamp cage connector retention cover and screw on the thumbscrew securely.
12. If bare skin has contacted the lamp bulb be sure to cleanse the envelope thoroughly (Section 2.2).
Fingerprints – or any contaminant – can cause deterioration of the envelope during lamp
operation and could lead to premature lamp failure or lamp explosion.
13. Replace the LCS-100
TM
top cover with the grooved edge engaging the front panel, sliding it
straight down. Replace the top 4 Phillips head screws, tightening securely.
Figure 16: Lamp mounted properly in its cage
Top