EasyManua.ls Logo

Newport Oriel LCS-100 - 8 Specifications; SPECIFICATIONS of LCS-100; TM Solar Simulator; Typical Output Power from LCS-100

Newport Oriel LCS-100
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
M94011A
Oriel
®
LCS-100
TM
Small Area Sol1A
- 27 -
8 SPECIFICATIONS
SPECIFICATIONS of LCS-100
TM
Solar Simulator
Beam Size 1.5 X 1.5 inch (38mm X 38mm)
Spectral Match Classification A (IEC 60904-9 2007)
A (ASTM E927 – 10)
Beam Non-uniformity B (IEC 60904-9 2007)
B (ASTM E927 – 10)
Temporal Instability B (IEC 60904-9 2007)
B (ASTM E927 -10)
Collimation Angle < 6°
Working Distance 7” ± 1” ( 203 ± 51mm)
Irradiance Adjustment Iris: + 0% - 40%
Height: ~0.18 SUN / inch
Light ripple: <0.5% rms
Line regulation: 0.03%
Operating Environment: 5°C to 40°C; <80% RH non-condensing; <3000m Altitude;
Indoor Use only; Installation Category II; Pollution degree 2
Lamp Type 100W Ozone – Free Xenon
Lamp Life ~1000 Hours typical
Input Power 100 – 240 VAC, 50 / 60 Hz, 130W
Fuses: 1.5A T (slo-blo), 250V for 100 / 120 VAC
0.8A T (slo-blo), 250V for 200 / 240 VAC
Typical Output Power from LCS-100
TM
Solar Simulator
Working Distance from the
output flange (inches)
Readings with AM0
Filter (mW/cm2)
Readings with AM1.5G
Filter (mW/cm2)
6 247 161
7 184 119
8 151 100
9 126 82
10 105 69

Table of Contents