XPS-D Controller User Interface Manual
Step 3: What to collect
This step configures the data type to be collected and is based upon the API function
GatheringConfigurationSet([DataType]). Refer to Features Manual for more
information. If this section is not empty, delete example data collection type by clicking
REMOVE.
1. Click on ADD DATA and the following window appears.
2. From the list, highlight the positioner name or GPIO from which data will be
collected and then click ADD. Example: Group1.Pos
3. If a positioner name is selected, from the list, highlight the data type to be collected
and then click ADD. Example: CurrentPosition
4. Click OK when the data type has been specified. Example: once the trigger event
occurs, current position values will be collected for positioner Group1.Pos.
5. Repeat Step 3 Add Data to add other data types to be collected under this specific
Gathering Configuration.
27 EDH0405En1012 – 09/18
To Next Page
Loading...
