Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
42
NDiS B533 User Manual
Chapter 4: BIOS Setup
Turbo Mode
Enables or disables turbo mode.
CPU C states
Enable CPU C States Support for power saving. It is recommended to
keep C3, C6 and C7 all enabled for better power saving.
Enhanced C1 State
Enables or disables Enhanced C1 state.
CPU C3 Report
Enables or disables C3 report to the operating system.
CPU C6 Report
Enables or disables C6 report to the operating system.
C6 Latency
Configures the latency for C6. The options are Short and Long.
CPU C7 Report
Enables or disables C7 report to the operating system.
C7 Latency
Configures the latency for C7. The options are Short and Long.
To Next Page
Loading...
