3. Using LIST & FAV button
If you press LIST or FAV button on the remote control, ALL channel list or FAV channel list
will be displayed respectively. In this menu you can navigate among channel list and
change the channel directly by pressing OK button. If you have a lot of channels in the
list, then press PgUp/PgDn button for faster move up or down.
4. Using ZOOM button
This HD-STB has specially designed PB ZOOM function. Press ZOOM button to swap
between widescreen and PB ZOOM screen. In the PB ZOOM screen, this HD-STB will
expand the original picture. Press UP or DOWN button to move the picture display
position. In the 4:3 picture with side black bars, this PB ZOOM can eliminate side black
bars. This PB ZOOM is affected with HD output only. SD output cannot use PB ZOOM for
prevent information loss when VCR recording. If you change the channel under PB ZOOM
screen, then it will automatically release PB ZOOM and return to widescreen display. For
release PB ZOOM, simply press ZOOM button again.
5. Using FREEZE button
You can freeze the picture using press FREEZE button in the remote control. It will release
the freeze picture automatically after 10 minutes. It is for prevent burn-in flat panel
screen.
Using the Remote Control Button
30
To Next Page
Loading...