NF WF1945B - Page 112

4.3 Modulation
4-50 WF1945B
(2) Set the phase DEVIATION
① Use the
and keys to produce the following display (DEVIATION flashes).
９０．０００ ｄｅｇ
ＰＭ：ＴＹＰＥ ＤＥＶＩＡＴＩＯＮ ＦＲＥＱ ＦＵＮＣＴＩＯＮ
② Press the
ENTER
key.
③ Set the deviation with the keypad or
MODIFY
dial.
For example, set to 45 degrees.
④ After setting, press the
EXIT
key once to exit phase deviation setting.
(3) Set the modulation FREQ
① Use the
and keys to produce the following display (FREQ flashes).
１００．００ Ｈｚ
ＰＭ：ＴＹＰＥ ＤＥＶＩＡＴＩＯＮ ＦＲＥＱ ＦＵＮＣＴＩＯＮ
② Press the
ENTER
key.
③ Set the frequency with the keypad or
MODIFY
dial.
For example, set to 200 Hz (5 ms).
④ After setting, press the
EXIT
key once to release the modulation frequency setting mode.