1.3 Function outline
WF1945B 1-5
•
Output on/off
The waveform and sync signal output connectors are on/off switchable for each channel.
The setting prior to power off is returned at power on. Be sure to set to either on or off as required.
•
User units setting
Coefficients and compensation can be applied to frequency, period, amplitude, DC offset, phase and duty for
setting and displaying these in desired units. The units can be expressed by up to 4 desired characters.
•
Setting store and recall
The settings for frequency, amplitude, etc., can be stored and recalled.
The WF1945B is capable of 10 combinations store/recall.
•
Computer control
Remote control (GPIB or USB) enables external control from a personal computer.
To Next Page
Loading...
