Nidec Control Techniques Digitax-SF DA24A23 - Page 260


Digitax SF Instruction Manual
Operation
６
6. Operation
5. Position Control Mode
5. Position Control Mode
Precautions for Testing
Testing
Before applying power to each drive or motor, be
sure that wiring has been performed correctly.
Set the parameters correctly before testing.
Check motor motion first with no machine connected.
For a brake-equipped motor, be sure to disengage the brake
before driving the motor.
Digitax SF Connect
Digitax SF Connect 
 

 ◉ Digitax SF Connect

 drive
 
 
  