Nidec Control Techniques Digitax-SF DA24A23 User Manual

2
Digitax SF Instruction Manual
1. Before Use
1. Important Safety Instructions
１. Important Safety Instructions
１．Safety Precautions
This manual uses the signs below to indicate serious but avoidable problems caused by misuse of
the product� One is for death or serious bodily harm� The other is for bodily injury or product or
equipment damage�
DANGER
Identies information about imminent hazards that will
result in death or serious injury�
CAUTION
Identies information about hazards that could result in
injury or equipment damage�
Throughout this document, the safety precautions that users must follow are marked as follows�
The possible hazardous events are marked as follows�
Safety Precaution - Prohibited Action
Safety Precaution - Mandatory Action
Cautions and Dangers
Causes unexpected, unstable, or uncontrolled motion�
Compromises the performance or reliability of the product�
Shortens the service life of the product�
Electric shock hazard
Burn hazard
Fire hazard
Injury hazard
Failure and damage hazard
Important safety information. Hazards. Competence of designers and
installers
T
his guide applies to products which control electric motors either directly (drives) or indirectly (controllers,
option modules and other auxiliary equipment and accessories). In all cases the hazards associated with
powerful electrical drives are present, and all safety information relating to drives and associated equipment
must be observed.
Specific warnings are given at the relevant places in this guide.

Nidec Control Techniques Digitax-SF DA24A23 Specifications

General

Brand	Nidec
Model	Control Techniques Digitax-SF DA24A23
Category	Servo Drives
Language	English