What to do if Nikkai Receiver loses digital reception after moving it?
If you are no longer able to receive digital reception on your Nikkai Receiver after moving the STB to another room: * The aerial feed former new point may come through a distribution system which may reduce the digital signal now received by the box, so try a direct feed from the antenna.
What to do if Nikkai Receiver shows a scrambled channel message?
If your Nikkai Receiver is displaying a scrambled channel message, it's likely because the channel is scrambled. Select an alternative channel.
How to reset forgotten channel lock code on Nikkai Receiver?
To reset a forgotten channel lock code on your Nikkai Receiver, re-install the channels to cancel the channel lock.
Warning against removing the unit cover to prevent electric shock hazards.
Identifies the LED indicator and the infrared remote sensor on the unit's panel.
Details the functions of each button on the remote control for operating the device.
Guidelines for safely installing and handling batteries in the remote control.
Step-by-step instructions for opening the battery compartment and inserting batteries.
Illustrates and describes how to connect the set-top box to a TV using a scart cable.
Guidance on making initial connections and powering on the set-top box.
Steps for the initial channel scan and setup when the device is first powered on.
Instructions on how to switch between TV and Radio broadcast modes.
How to use the quick select list and navigate through channels.
How to view current program details using the INFO button.
Using the RECALL button to return to the previously viewed channel.
Switching between audio languages and stereo/mono sound modes.
Accessing and navigating the EPG to view program schedules.
Detailed explanation of EPG features like daily/weekly planners and program info.
Accessing and navigating Teletext pages for additional information.
Enabling and selecting subtitles for programs.
Overview of the main menu and the initial channel installation process.
Features for organizing, sorting, grouping, editing, and deleting channels.
Customizing display, audio, time, and other system preferences.
Setting up timers, parental locks, and restoring factory settings.
Instructions on how to launch and play the pre-installed games.
General| Tuning range | FM: 88-108 MHz, MW: 530-1600 kHz |
|---|---|
| Frequency response | 20Hz to 20kHz |
| Total harmonic distortion | 0.5% |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to noise ratio | 70dB (MM), 80dB (line) |
| Output | 150mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
To Next Page
