Nikon CoolPix 2000 - First Steps: Getting Started with Your Camera

Introduction—First Steps
9
Step 2—Insert Batteries
Your camera is powered four LR6 (AA) alkaline, NiCad, or NiMH batteries.
2
.1 Turn the camera off
Turn the camera off before inserting or re-
moving batteries.
First Steps
Getting Ready to Use Your Camera
Before using your camera for the first time, you will need to complete the
following steps.
Step 1—Attach the Camera Strap
Attach the strap as shown.
2
.2 Open the battery-chamber cover
Pressing the battery-chamber cover latch,
slide the cover out (1) and flip it open (2).
2
.3 Insert the batteries
Insert the batteries with the “+” and “–”
contacts oriented as shown.
1
2
The Battery-Chamber Cover
The cover can be damaged by application of excessive force.