Contents Index
2
Prepare
2 Charge the camera.
Use the supplied charging AC adapter when charging the
camera for the first time.
2.1 Turn the camera off and connect the USB cable to the
camera (q) and AC charging adapter (w).
2.2 Plug the adapter in (e).
2.3 When charging is complete, unplug the charging AC
adapter and disconnect the USB cable.
The power-on lamp slowly
flashes orange during charging
and turns off when charging is
complete (charging a fully-
exhausted battery takes about
2 hours and 50 minutes). If the
power-on lamp flashes orange
rapidly, an error has occurred.
Check that the USB cable is
correctly connected and that the
ambient temperature is between
5 °C and 35 °C (41 °F–95 °F).
Pictures can not be taken
while the charging AC adapter is
connected.
Once the clock has been set
(A 3), the camera will also
charge when connected to a
computer via a USB cable
(A 71).
The power lamp flashes during
charging and turns off when
charging is complete.
To Next Page
Loading...
Need help?
General
