76
Contents Index
Shoot View Connect The Setup Menu Technical Notes
Caring for the Camera: Cautions
Caring for the Camera: Cautions
To ensure continued enjoyment of your Nikon product, observe the precautions listed in this
section and in “For Your Safety” (A iii–iv) when storing or using the device.
❚❚ Camera Care
Do not drop
: The product may malfunction if subjected to strong
shocks or vibration. Do not touch or apply pressure to the lens.
Keep dry
: This product is not waterproof, and may malfunction if
immersed in water or exposed to high levels of humidity. Rusting of
the internal mechanism can cause irreparable damage.
Avoid sudden changes in temperature: Sudden changes in
temperature, such as those that occur when entering or leaving a
heated building on a cold day, can cause condensation inside the
device. To prevent condensation, place the device in a carrying
case or plastic bag before exposing it to sudden changes in
temperature.
Keep away from strong magnetic fields: Do not use or store this
device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields. Strong static
charges or the magnetic fields produced by equipment such as
radio transmitters could interfere with the displays, corrupt data,
or affect the product's internal circuitry.
Do not leave the lens pointed at the sun: Do not leave the lens
pointed at the sun or other strong light source for an extended
period. Intense light may cause the image sensor to deteriorate
or produce a white blur effect in photographs.
Turn the product off before disconnecting the charging AC adapter:
Do not unplug the product while it is on or while images are
being recorded or deleted. Forcibly cutting power in these
circumstances could result in loss of data or in damage to
product memory or internal circuitry.
The monitor: The monitor is constructed with extremely high
precision; at least 99.99% of pixels are effective, with no more
than 0.01% being missing or defective. Hence, while the monitor
may contain pixels that are always lit (white, red, blue, or green)
or always off (black), this is not a malfunction and has no effect on
images recorded with the device.
Images in the monitor may be difficult to see in a bright light.
To Next Page
Loading...
Need help?
General
