15
4 Insert a memory card (available separately).
Check to be sure the card is in the correct orientation and then slide the card
until it clicks into place.
5 Attach a lens.
Be careful to prevent dust from entering the camera when the lens or body cap
is removed.
Autofocus is available with AF-S lenses.
When using
autofocus with a lens equipped with an A-M mode switch,
slide the switch to A (if the lens has an M/A-M switch, select
M/A for autofocus with manual override).
For information
on other lenses that can be used with the D5200, see page 199.
If the lens has a vibration reduction (VR) switch, select ON
to reduce the effects of vibration (0 238).
Mounting mark (lens;
indicated by white dot)
Keeping marks (white dots) aligned, position lens on
camera, then rotate until lens clicks into place.
8
GB
Mounting mark
(camera)
Mounting mark (lens)
To Next Page
Loading...
