Nikon D5200 - Page 18

8
4 Insert
a
memory
card
(available separately).
Check
to
be sure the card
is
in
the
correct orientation and then
slide
the
card
until
it
clicks
into
place.
5
Attach a
lens.
Be
careful
to
prevent dust from entering the camera when the
lens or
body
cap
is
removed.
mark
(camera)
Mounting
mark
(lens)
Mounting
mark
(lens;
indicated
by
white
dot)
Keeping marks (white dots) aligned, position lens on camera,
then rotate until/ens clicks into place.
Autofocus
is
available
with
AF-S
lenses. When using
A M
autofocus
with
a
lens
equipped
with
an
A-M
mode switch,
--.
.-
slide
the
switch
to
A
(if
the
lens
has
an
M/A-M
switch, select
(II
ntl))
M/A
for autofocus
with
manual
override).
For
information
on
other
lenses
that
can be used
with
the 05200,
see
page
72.
If
the
lens
has
a vibration reduction
(VR)
switch, select
ON
to
reduce the effects
of
vibration.