Nikon D5200 - Page 88

Storage:
To
prevent
mold
or
mildew, store
the
camera in a dry,
well-ventilated
area.
If
you are
using
an
AC
adapter,
unplug
the
adapter
to
prevent fire.
If
the
product
will
not
be used for
an
extended period, remove the battery
to
prevent leakage and store the camera in a plastic bag
containing a desiccant. Do not, however, store the camera
case
in a plastic bag,
as
this may
cause
the
material
to
deteriorate. Note
that
desiccant gradually
loses its capacity
to
absorb
moisture and should be replaced
at
regular intervals.
To
prevent
mold
or mildew, take
the
camera
out
of
storage at least once a
month.
Turn the
camera on and release
the
shutter a
few
times before
putting
it
away.
Store
the
battery in a cool,
dry
place. Replace the terminal cover before
putting
the battery
away.
Notes
on
the
monitor:
The
monitor
is
constructed
with
extremely high precision;
at
least
99.99°/o
of
pixels are effective,
with
no more than
0.01
o/o
being missing or defective. Hence
while
these
displays may contain pixels
that
are always
lit
(white, red, blue,
or
green)
or
always
off
(black),
this
is
not
a malfunction and
has
no
effect on images recorded
with
the
device.
Images
in the
monitor
may be
difficult
to
see
in a
bright
light.
Do
not
apply pressure
to
the monitor,
as
this could cause damage or malfunction. Dust or
lint
on the
monitor
can
be removed
with
a blower. Stains
can
be removed by
wiping
lightly
with
a
soft
cloth
or
chamois leather. Should
the
monitor
break, care should be taken
to
avoid injury
from broken glass and
to
prevent liquid crystal from the
monitor
touching
the
skin or entering
the
eyes
and mouth.
Moire:
Moire
is
an
interference pattern created by the interaction
of
an
image containing a
regular, repeating grid, such
as
the pattern
of
weave in
cloth or windows in a building,
with
the
camera image sensor grid.
If
you notice
moire
in your photographs,
try
changing the distance
to
the subject, zooming in and out,
or
changing the angle between the subject and the
camera.
Caring for
the
Battery
Batteries may leak or explode
if
improperly
handled.
Observe
the following precautions when
handling batteries:
•
•
•
•
Use
only batteries approved for use in this equipment.
Do
not
expose the battery
to
flame
or
excessive heat.
Keep
the
battery terminals
clean
.
lil·
Turn
the
product
off
before replacing
the
battery .
Remove
the
battery from the camera
or
charger when
not
in
use
and replace
the
terminal
cover. These devices draw
minute
amounts
of
charge even when
off
and could draw the
battery
down
to
the
point
that
it
will
no
longer function.
If
the battery
will
not
be used for
some time, insert
it
in the camera and run
it
flat before removing
it
and storing
it
in a location
with
an
ambient temperature
of
15
octo
25
oc
(59
oF
to
77
oF;
avoid
hot
or
extremely
cold
locations). Repeat this process at least once every six months.
•
78
Turning
the
camera on and
off
repeatedly when the battery
is
fully
discharged
will
shorten
battery life. Batteries
that
have been
fully
discharged must be charged before
use.