Chapter 4 Connecting and Installing the Equipment
3 Connection Methods
- 11 -
4
(4) Connecting to a Power Supply
To prevent electric shock, turn off the power for the DS-U1 before making any connections.
Complete all other connections before plugging into a power supply.
When connecting the DS-U1 to a power supply, always use the specified power cord. Using the
wrong power cord may lead to a fire or other dangerous conditions.
This product belongs to electric shock protection class I and must be connected to a power outlet
with a protective ground terminal. If you misplace or damage the power cord, please contact
your nearest Nikon representative.
To Next Page
Loading...
