Nikon DS-U1 - Troubleshooting; Power Supply

Chapter 8 Troubleshooting
1 Power Supply
- 31 -
8
8
Troubleshooting
If you experience any problems, check the troubleshooting list below.
If you are still not able to resolve the problem, consult with your nearest Nikon representative.
1
Power Supply
Symptom Corrective action
The power does not
come on.
• Make sure the power cord is plugged firmly into an AC outlet at one
end and the AC-IN connector on the DS-U1 main unit on the other.
• Use the power cord supplied with the system.
• Turn on the POWER switch.
The main unit is hot
to the touch.
• The main unit temperature may increase when used in a hot or
confined space. If the high temperature is accompanied by a burnt
smell or other offensive smells, turn off the switch, unplug the power
cord and ask for repair.