- iii -
1. Installation environment
• Do not use this equipment in locations subject to high temperatures, high humidity, vibration, or
excessive amounts of dust. Doing so may result in fire or malfunction.
• When used for an extended period of time, the DS-U1 may become hot. Do not place the DS-U1 on
a surface that cannot withstand heat (such as vinyl or plastic). Always install the equipment with a
surrounding clear area of 100 mm or more.
2. Always turn off power when setting up the equipment or when
connecting/disconnecting cables.
To prevent damage or malfunction, always turn off the DS-U1’s POWER switch when setting up the
equipment or when connecting or disconnecting cables.
3. Connect only the devices specified to the connectors.
To prevent damage to the equipment, connect only the devices specified to the connectors on the
DS-U1, the DS Camera Head DS-5M or, the DS Cooled Camera Head DS-5Mc.
4. Cautions on setup, installation, and storage of the equipment
• Be careful to avoid pinching your fingers or hands in the equipment during installation.
• To prevent damage to the equipment, avoid subjecting it to physical shock or violent vibrations
during installation.
• If you will not be using the equipment for an extended period of time, unplug the power cord from
the power outlet.
•
Store equipment in a location where it will not be subject to vibrations or excessive amounts of
dust.
•
Avoid storing the equipment in hot, humid locations.
To Next Page
Loading...
