IV Microscopy (Detailed Procedure)
30
18
Turning Off the Lamp
Turning off the power switch (turn to
{
) switches off the lamp.
When storing the microscope:
• Unplug the power cord.
• Wait until the field lens unit is cool enough to touch.
• Return the binocular part to its lowest position.
• Cover the microscope with the vinyl dust cover. (Before covering the microscope, make sure
that the field lens unit is cool enough to touch.)
• When carrying the microscope, hold it at its upper rear and lower front ends.
19
Epi-illuminator
When the microscope is used together with the
epi-illuminator, insert the polarizer slider into the
filter-holder slot far from the light source.
Insert the
To Next Page
Loading...
