Nikon R1 - Page 51

51
 Flash operation using the R1
5
Setting a channel and group number on the
SB-R200.
1
Rotate the [CHANNEL] select dial
on the SB-R200 to set the channel
number.
• Set the channel number of the SB-R200 to 3
when using a Nikon D70-Series digital
camera, otherwise the flash will not fire.
2
Rotate the [GROUP] select dial on
the SB-R200 to set the group.
• Set the group of the SB-R200 to Group A when
using a Nikon D70-Series camera, otherwise
the flash unit will not fire.
CHANNEL
2
3 4
1
CHANNEL
GROUP
A
3 4
B
C