223Technical Notes
❚❚ Attachment and Removal
Turn the camera off before attaching the adapter to or removing
it from the camera or attaching lenses to or removing lenses
from the adapter. Choose a location out of direct sunlight and be
careful to prevent dust from entering the devices. While
attaching lenses, avoid pressing the camera or adapter lens
release.
Attaching the Adapter and Lens
1 Remove the body and rear lens caps from the adapter and
the body cap from the camera.
2 Attach the adapter to
the camera.
Keeping the adapter
mounting mark aligned
with the mounting
mark on the camera
body (q), position the adapter on the camera and then
rotate it counterclockwise until it clicks into place (w).
3 Remove the rear lens cap.
To Next Page
Loading...
