5
General information
Introduction
General information prior to installation
Disclaimer
Symbols explained
Application of instruction manual
General information prior to installation
The following documents will be supplied with the unit:
•
Installation and service instructions
Software instructions
Wiring diagram
The instructions can be downloaded from:
www.nilan.dk.
If you have questions regarding installation and operation of the unit after having read the instructions, please contact your
nearest Nilan dealer. A list of Nilan dealers is available on:
www.nilan.dk
ATTENTION
In order to avoid discolouration of the metal sheets, remove the protective foil packaging from the unit immedi-
ately after delivery. Discolouration is caused by a chemical reaction triggered by condensation between the foil
and the galvanized sheets. Then, if necessary, cover the unit with tarpaulin to protect it.
The unit is delivered from the factory, tested and ready for operation.
Disclaimer
In order to achieve correct operation of the unit and to ensure the safety of persons and equipment, the instructions must be
followed. Nilan A/S disclaims all responsibility for damages resulting from usage of the unit and/or accessories confl icting with
the directions and instructions of this manual.
WARNING
Violation of instructions marked with a warning symbol could be hazardous to life.
ATTENTION
Violation of instructions marked ATTENTION could pose risk of personal injury or damage to equipment.
Application of instruction manual
This instruction manual applies to Nilan’s ventilation and heat recovery unit, hereafter referred to as unit. Information on
accessories that are included and other additional equipment can be found in the Accessories section.