Unit type
Product description
The VPM 600-3200 series is a ventilation and heat recovery unit with cooling and heating functions developed especially for
commercial constructions with an air exchange requirement of up to 32,000 m
3
per hour.
A VPM unit removes the “used”, humid air from the building and supplies new, “fresh” air in turn. The energy in the extract air is
recovered and transferred to the supply air via a unique combination of active (heat pump) and passive (heat pipe) heat recovery.
The high effi ciency of the VPM series is due to this unique design, which combines the best of two technologies. This improves
effi ciency so much that it comes close to 100 %. This means that the need for heat supply during the cold winter months is reduced
to a minimum, and signifi cant savings are achieved on the building’s energy consumption and a reduction in CO
2
emissions. During
summer the process is reversed and the supply air is cooled.
It is possible to add a heat exchanger to the refrigeration circuit. It enables utilisation of excess energy or waste energy created
by the cooling process, for example, for heating domestic hot water.
The unit is modularly designed according to individual wishes and needs, making it an extremely easy-to-install plug-and-play
solution. The unit can be controlled and monitored via our CTS602i control system.
Left-facing version:
To Next Page
Loading...
