Nilfisk-Advance SW4000 - SCHEDULED MAINTENANCE TABLE

USER MANUAL ENGLISH
1464809000 - SW4000 19
SCHEDULED MAINTENANCE TABLE
Procedure Upon delivery
Every
10
hours
Every
50
hours
Every
100
hours
Every
200
hours
Every
year
Battery charging (1)
%DWWHU\:(7ÀXLGOHYHOFKHFN (2)
Side and main broom height check
Brake cable check and adjustment (3)
+RSSHUGXVW¿OWHUFKHFNDQGFOHDQLQJ³$´PHWKRG (4)
Hopper hydraulic lifting system oil level check (2)
Skirt height and operation check
'XVWJXDUGV\VWHPZDWHU¿OWHUFKHFNDQGFOHDQLQJRSWLRQDO
+RSSHUGXVW¿OWHUFKHFNDQGFOHDQLQJ³%´PHWKRG (4)
Filter shaker operation check (*)
Main broom driving belt check (*)
Steering chain cleaning (*)
Safety system operation check (2)
Brake pad check/adjustment/replacement (*)(3)
+RSSHUGXVW¿OWHUFKHFNDQGFOHDQLQJ³&´PHWKRG (4)
Main broom driving belt check and/or replacement (*)
Hopper gasket integrity check (*)
Lifted hopper sensor operation check/adjustment (*)
Motor carbon brush check and/or replacement (*)
Hydraulic system oil change (*)(5)
(*) For the relevant procedure, refer to the Service Manual.
(1) Daily or after using the machine.
(2) Or before start-up.
(3) Or more frequently if the machine is used on slopes.
(4) Or more often in dusty areas.
(5) Change the hydraulic system oil after 500 hours or every year.