4-4
I4-1
OPERATOR’S MANUAL FOR INFANT INCUBATOR EDITION/REVISION B/0
22. Switch setting indicator key
Press this key to select the setted value of temperature, humidity and oxygen concentrition
displayed in the indicator in turn.
23. Air mode key
In set state, press to come into Air Mode.
24. Air temperature mode indication light
This light is on when it is in Air Mode.
25. Keypad lock
Press to active all functional keys.
（NOTE: Except for the Oxygen Concentration Indicator key, Humidity Indicator key, Zero
key, Calibration key and Switch Setting Indicator key.）
26. Baby mode key
In set state, pressing this key to enter into Baby Mode.
27. ＞37 key℃ (if applicable)
When incubator works under the state of ＞37 , in set state, press to make the control ℃
value override ＞37 to set temperature.℃
NOTE: Before setting temperature at 37℃, pressing this key does not work.
WARNING: Under the state of ＞37℃, the patient is in the environment of
high temperature, and the nurse should examine the patient
carefully.
28. Power failure alarm indicating light
This light enlightening when the power failure alarm activies.
29. Silence /Reset key
When alarm actived, press it once to clear the auditory alarm, and press this key twice to
clear the alarm.
30. Alarm indicating light
When something wrong with the device, this light will be enlightened （except for system
alarm）
31. Set down key
In set state, press this key to decrease the set temperature. Press this key constantly to
speed the decreasing temperature.
32. Set up key
In set state, press this key to increase the setting temperature. Press this key constantly to
speed the increasing temperature.
To Next Page
Loading...
