Wi-Fi mode
The Wi-Fi indicator is used to display the Wi-Fi status in the robot.
Color Description Trigger
Solid blue The robot is hotspot mode
Hotspot activated using Niryo Studio or the Wi-
Fi button
2 blue blinks
followed by a
pause
The robot is connected to a
network
The robot is connected to the network either
with an Ethernet cable or via Wi-Fi
Quick blinking
blue light
Wi-Fi mode change in
progress
Press the Wi-Fi button
LED off
The robot’s hotspot and
Wi-Fi are not activated
In order to activate a mode, you must press
the Wi-Fi button
Wi-Fi button
Function Type of action Condition Status after action
Activate the
hotspot
Short press The robot is in a Wi-Fi mode
The robot is in
hotspot mode
Activate the Wi-Fi Short press
The Wi-Fi is not activated or the
robot is in hotspot mode
The robot is in a Wi-
Fi mode
Deactivate the
hotspot and wifi
Long press
The Wi-Fi or hotspot mode is
activated
The Wi-Fi (and
hotspot) are
disabled
Top buttonTop button
The top button on the Ned2 has multiple functions, depending on how long your press on it or the
number of presses.
Time/Number of presses Function
A program is running
1 short press (0.1 and 2 seconds) Pauses the program
1 long press (> 2 seconds) Stops the program
A program is paused
To Next Page
Loading...
