Manually stopping or overriding the arm: if needed, Ned2 arm can be stopped manually. This is
possible since Ned2 arm is light, the arm force is limited, and the drivetrain power is limited.
To prevent unnecessary damage and wear of Ned2 arm, it is recommended to use the normal stopping
functions of Ned2 (by the software or the top button).
Note
Ned2 is not equipped with brakes since its weight and design do not require a holding brake.
Installation and commissioningInstallation and commissioning
This section specifies the procedures to follow during unpacking and transportation.
TransportTransport
Be sure to transport the robot in its original box to avoid damage.
Ned2 User Manual (v1.0.0)Ned2 User Manual (v1.0.0)
2022, Niryo All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Niryo SAS
To Next Page
Loading...
