Niryo Ned2 - General Safety Information

Embedded software and configuration of the motor parameters.
Niryo disclaims all liability for any damage caused to and by the robot as a result of these modifications.
Safety symbolsSafety symbols
This section species all dangers that can arise when doing the work described in the User Manual. Each
danger consists of:
A caption specifying the danger level (DANGER, WARNING, or CAUTION) and the type of danger;
A brief description of the danger;
Instruction about how to eliminate danger.
Symbol Designation Description
DANGER
Warns that if instructions are not followed, an accident will occur
resulting in personal injury.
WARNING
Warns that if instructions are not followed, an accident will occur
which could lead to personal injury or damage to the product.
CAUTION Warns of possible damage to the product.
NOTE Describes an important fact or condition.
ADVICE Describes additional information or an easy way to use the function.
ELECTROSTATIC
DISCHARGE
Warns of a possible electrostatic discharge which could damage the
robot.
ELECTRICAL
SHOCK
Warns of an electrical hazard.
CHRUSHING OF
HANDS
Warns of the risk of crushing hands between two mechanical parts.
General safety informationGeneral safety information
 Danger
Before installing, using or programming Ned2, you must read the specications and the
product manual.
Install Ned2 and all the electrical equipment in accordance with the specications and
warnings in the Installation, Mechanical interface and Electrical interface chapters.
It is important to ensure that any modication to the robot’s software will not cause any danger or
damage to the user and the product.
Children are not permitted to handle the robot.
Ned2 User Manual (v1.0.0)Ned2 User Manual (v1.0.0)
2022, Niryo All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Niryo SAS