Niryo Ned2 - What the Box Contains; Intended Use

 Warning
Maintain good posture when handling the arm or arm cartons to avoid back injuries.
What the box containsWhat the box contains
When you order Ned2 you receive a box with the following items:
1x Ned2 Robot
1x Custom Gripper
1x Power supply
1x Safety box
2x Analog I/O connector
2x Digital I/O connector
1x Universal travel plug adapter
1x SD card reader
1x manual instruction
1x Quickstart
Intended useIntended use
The Ned2 robot is intended for educational, and research and development purposes, i.e.:
learning robotics;
research and development in robotics;
simulation and prototyping of complete industrial scenarios such as “Pick & Place” (take an object to
move it), “Pick & Pack” (take an object to insert it into a packaging);
hardware application: connect and control the robot with sensors and external actuators in order to
simulate an application, while respecting the conditions defined in this instruction manual.
The operations below do not comply with the uses set by Niryo. They include:
Ned2 User Manual (v1.0.0)Ned2 User Manual (v1.0.0)
2022, Niryo All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Niryo SAS