46
Authentication Limit Time
The fingerprint input waiting time is
between 3 and 9 seconds, and the
default is 5 seconds.
LFD (Live Finger Detection)
Precision
Sets whether to distinguish fake
fingerprints, to what degree of
precision. Select “Low”, “Middle”,
“High”, or “Do not use”.
Sensor Option
If the fingerprint is too bright or dark,
the brightness, contrast, and gain
can be adjusted. In 1:N mode, the
terminal’s basic sensor settings will
be applied even though individual
sensor options were set during user
registration.
Select the “Brightness”, “Contrast”, or
“Gain” tab, and select the value by
moving your finger on the slider.
To Next Page
Loading...
