67
Firmware Update
NAC-5000 firmware can be updated through the USB port. Do the
following to update firmware.
1. Store firmware cab file under the root folder of the USB memory.
2. Connect a USB memory to the terminal USB port.
3. Restart the system by using the power switch of the terminal or by
selecting Admin – Reset-Reboot.
4. When the system is restarted, the firmware will be loaded from the
USB memory and will be automatically updated.
The administrator can also update the firmware using “AccessManager“,
a server management program. For more information, see the
AccessManager Professional manual.
To Next Page
Loading...
