Nixeus FreeSync EDG 27 User Manual

27
AUDIO SOURCE
The AUDIO SOURCE settings gives you the option to select which connection source to transmit audio to the
NX-EDG27 internal speakers. By default, the AUDIO SOURCE will be set the cable connection transmitting
Video or picture. Only DisplayPort and HDMI can transmit video and audio to the NX-EDG27. The NX-
EDG27 also includes a 3.5mm audio cable for an "Line In" alternative audio source transmission - mainly for
the DVI connection since DVI cannot transmit audio.
a) In the ADVANCE sub-menu, use the buttons "DOWN" or "UP" to highlight AUDIO SOURCE and press
"MENU" to confirm selection.
b) Press "VOL -" or "VOL+" change the AUDIO SOURCE (if you are planning to use "Line In" with 3.5mm
audio cable). Default AUDIO SOURCE may be DP or HDMI.
c) Once you selected your AUDIO SOURCE, press "MENU" once to confirm and press "AUTO" to exit to
the ADVANCE sub-menu.

Nixeus FreeSync EDG 27 Specifications

General

Brand	Nixeus
Model	FreeSync EDG 27
Category	Monitor
Language	English